Form Knurling Wheels

Straight and diamond knurls that displace material to raise a pattern. The most common wheel type for grip surfaces.

Showing 7 of 7 Form Knurling Wheels

Standard sizes and pitches shown below; non-standard pitches (0.1, 0.2, 0.3 mm) also available on request (price on request).

Standard sizes and pitches shown below; non-standard pitches (0.1, 0.2, 0.3 mm) also available on request (price on request).

Standard sizes and pitches shown below; non-standard pitches (0.1, 0.2, 0.3 mm) also available on request (price on request).

Standard sizes and pitches shown below; non-standard pitches (0.1, 0.2, 0.3 mm) also available on request (price on request).

Standard sizes and pitches shown below; non-standard pitches (0.1, 0.2, 0.3 mm) also available on request (price on request).

Standard sizes and pitches shown below; non-standard pitches (0.1, 0.2, 0.3 mm) also available on request (price on request).

Standard sizes and pitches shown below; non-standard pitches (0.1, 0.2, 0.3 mm) also available on request (price on request).

Where it's used

Applications for form knurling wheels

A straight knurl on the shaft locks rotor cores, commutators, impellers and couplings in place without keys, adhesives or splines.

Straight and diamond knurls give a secure, comfortable grip on control knobs, tool handles, adjusters and hand-tightened screws.

A straight knurl under the head bites into the hole so the stud cannot turn when the nut is tightened.