هذا المحتوى غير متوفر بلغتك بعد، لذلك يُعرض باللغة الإنجليزية.
Single Start Leadscrews
Square Thread Leadscrew
Square thread leadscrews, Ø3 to 50 mm, pitch 1 to 10 mm, made by thread cutting to customer requirement.
The square thread has flanks square to the axis. It was the original power screw form; the ACME thread replaced it largely because straight flanks are difficult to manufacture. Where a square thread is specified, we make it by thread cutting.
Square thread leadscrews are made to order, Ø3 to 50 mm with pitch 1 to 10 mm.
Thread cutting
- Run-out up to 0.1 mm
- Pitch accuracy 500 µm per metre
- Production time 2 to 4 weeks for 1000 pieces
- Materials: EN8, EN19, WPS, EN24, EN36, SS303, SS304, SS316, SS410, SS420
- Square thread profile
- Ø3 to 50 mm, pitch 1 to 10 mm
- Made by thread cutting
Made to order. Send your drawing or thread data for a quote.
To quote, please provide:
- Diameter, pitch, starts and hand
- Length and end machining (drawing if available)
- Material and quantity
- Nut required (type and material)
Square thread
| Diameter | 3 to 50 mm |
| Pitch | 1 to 10 mm |
| Process | Thread cutting |
| Run-out | Up to 0.1 mm |
| Pitch accuracy | 500 µm per metre |
| Production time | 2 to 4 weeks per 1000 pieces |
